Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Blog Article
Just how do you really feel in regards to How to Troubleshoot and Repair an Electric Water Heater?
Numerous modern-day residences take advantage of an electrical hot water heater for their heater, because of its convenience and ease of use. However, much like any other electrical appliances, problems may arise with its use, all of a sudden. It can be actually aggravating to awaken to a cool shower as opposed to a hot one or having your bath with water that isn't hot enough or perhaps also hot. Whatever the instance may be, water heater troubles can be quite aggravating. Luckily, we have actually made a list of feasible solutions to your hot water heater concerns. There are a number of aspects that can create a number of these problems, maybe a concern with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it dealt with must not pose way too much of a problem if you adhere to these steps:
Call A Specialist:
If after replacing all faulty components and resetting your temperature, the hot water heater still isn't working, you might require to call an expert plumber for an expert opinion. The issue with your heating system could be that the cold and hot taps have been switched over or it may be undersized for the quantity of hot water needed in your house. Whatever the case might be, an expert plumber would certainly aid fix the problem.
Inspect Your Power Supply:
As basic as this might appear, it is extremely required. Without appropriate power, your hot water heater will not work. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, simply turn it on and off once more. Replace any type of damaged or worn-out fuse. Check the device with power after these changes to see if it's now working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to check the temperature settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset over the thermostat. This need to aid heat up the water. Turn the circuit breaker back on and also examine if the problem has actually been solved.
Check the Heating Element in the Water Heater:
If it's not a power issue, after that attempt having a look at your heating element if it is still functioning. Examine each of your burner to make sure the issue isn't with any one of them. If any one of them is defective, change that component and afterwards check whether the hot water is back on.
Verdict
Water heater issues are not always significant. A lot of them are because of small problems like a blown fuse or damaged heating element. Replacing the faulty components need to do the trick. Nevertheless, if you are still not able to resolve the problem, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our topic about What Would Cause My Electric Water Heater to Stop Working?. Many thanks for taking time to read our post. Please take the opportunity to distribute this blog entry if you enjoyed reading it. Bless you for your time. Kindly pay a visit to our site back soon.
Professional plumbers, immediate response. Report this page